How To Easel Card

CRAFTY CARDZ ~  HOW TO EASEL CARD

I have wanted to make one of these for a while now.. so thought while I make one.. why not do one as a tutorial to share with others who haven't ever made one before.  I have also added this to the Saturday's Challenge.. for easel cards..


Also I have added it to Simon Says Challenge.

I gathered together...

Tape

Ink pads

Ruler

Scissors

Glue

Glitter

Pearl touch

Card

Paper

Rubber Stamp

Paints

Ribbon

1.  Your base card stock should be approx 21 cm x 10.5 cm  (8.5 in x 4.3 in)

2.  Fold this at 10.5 cm ( 4.3 in - so in half) and then again at 15.8 cm.. (6.4 in approx - so that will be one side in half again).

3.  Cut a square of approx 15. 5 cm x 10.5cm ( 6.2 in x 4.3 in - using the same base card stock.

4.  Cut a piece of your paper to 10 cm x 10 cm. (4 in x 4 inch)

5.  Ink all the edges of the square matt the paper and then stick together.

6. Stamp your image on to your scrap card, paint and glitter.

 

7.  Stick your square matt to the base card.

8.  Measure your smaller paper to 10.5 cm x 6 cm   (4.3 in x 2.6 in) and ink all edges.  Add your ribbon.

9.  Stick this to the bottom on your card on the inner side.

10.  Add your glittered stamped image and a daisy or what ever you like.  You can see that I have used a daisy along with the pearl drops.

It is then ready to give to that someone special!

Hope you enjoyed this tutorial.  

Don't forget to check the Envelope section as I have added the size and directions to make one just for this Easel card!